Arson investigators face the challenge of determining the cause of a fire, sometimes with no more than charred remains of a structure to give them the evidence they need. One of the tools often used for gathering evidence is the fuel vapor detector, which can detect trace amounts of propellant in parts per million (ppm) concentrations. Even though the fire has seemingly consumed everything, the fuel vapor detector can "see" evidence which is invisible to the eye.

How Does a Fuel Vapor Detector Work?
The Combustible Sensor consists of two coils of fine platinum wire each embedded in a bead of alumina, connected electrically in a bridge circuit. One of the beads is impregnated with a special catalyst which promotes oxidation and the other is treated to inhibit oxidation. Current is passed through the coils so that they reach a temperature at which oxidation of a gas readily occurs at the catalyzed bead (about 500°C). This raises the temperature further which increases the resistance of the platinum coil in the catalyzed bead, leading to an imbalance of the bridge. This output change is linear, for most gases, up to and beyond 100% LEL and response time is only a few seconds to detect alarm levels (typically 20% LEL). Most fuel vapor monitors can detect concentrations as low as 10 or 20 ppm all the way up to 100%LEL and are typically calibrated with a Hexane gas standard.

Christopher Miller

Equipco

Rentals, Sales, and Service of Environmental Equipment

1-888-234-5678

Visit our forum to ask us questions about environmental equipment.

EQUIPCO was established as a service and rentals company nine years ago, and we have since grown into a complete rentals, sales and service provider. We are a factory authorized/certified repair center for most of the major instrument manufacturers that you are familiar with.

Why Rent From EQUIPCO? Three Reasons...

Best Price Guarantee!
EQUIPCO will beat any competitor"s legitimate rental rate or sales quote.

More Choices!
EQUIPCO has the most varied pool of rental instruments in the industry, bar none.

All Maintenance Performed by Engineers!
EQUIPCO employs only Electronics Engineers in our maintenance and repair departments.